Filter
Top Products
7
1. Disconnect the oil return line from the pump.
2. Unplug the cord from the receptacle on the side of the cabinet.
3. Pull the filter unit from the cabinet.
4. Disconnect the line from the pump to the filter screen.
5. On the Filtronic II models, pivot the motor assembly up out of the way.
6. Remove the filter cover. Use lift out handle to remove screen assembly. Place on a clean surface for
disassembly.
7. Detach quick-connect coupling on drain tube from knurled retaining nut.
8. Detach knurled retaining nut from fitting in screen.
9. Remove filter envelope clip from end of filter screen and folded back end of envelope .
10. Remove filter envelope from filter screen.
11. Clean the filter pan, filter screen and all components thoroughly using a solution of hot water and
detergent. Make sure that all food and breading particles are removed from the pan and from the filter
screen.
12. Dry the pan, the screen and all components completely before starting to reassemble.
13. Follow instructions under FILTER UNIT PREPARATION to install new filter envelope.
REPLAREPLA
REPLAREPLA
REPLA
CING CING
CING CING
CING
THE FILTHE FIL
THE FILTHE FIL
THE FIL
TER PTER P
TER PTER P
TER P
APERAPER
APERAPER
APER
If the filter paper becomes torn, or if the time to filter the oil from one unit becomes excessive, it is time to
replace the Filter Envelope.
The oil soaked filter envelope may still be very hot and could cause burns.
WARNING
DANGER
Make sure the filter pan has cooled completely to room temperature before
attempting to change the paper.
!
!