Filter
Top Products
4
SPECIFICATIONS AND DIMENSIONS
! Non jamming agitator motor gently turns to distribute kernels evenly over heated surface.
! Motor and controls located away from kettle heat in vented part of top cabinet.
! Produces a kettle of popcorn every 2 1/2 minutes.
! Popcorn kept hot by using heating element on the bottom and bulb heat on the top.
! Interiors are stainless steel.
! Cabinet constructed of stainless steel and tempered glass.
! Kettle made of heavy-gauge aluminum surrounded by stainless steel.
! Kettle is secured to cabinet through double-hung, stainless steel brackets.
6
-
8 oz
120
1125
9.4
25 1/2"H x 19"W x 15 5/8" D
63#
6
-
8 oz
240
1125
4.7
25 1/2"H x 19"W x 15 5/8" D
63#
8
-
10 oz
120
1643
13.7
30"H x 22 1/4"W x 21 1/4" D
75#
MPC-1A
MPC-1A
PC
-1A
PC
-1A
8
-
10 oz
240
1643
6.8
30"H x 22 1/4"W x 21 1/4" D
75#
MODEL
SIZE
VOLTS
WATTS
AMPS
DIMENSIONS
SHIP WT.
INSTALLATION
1. Always clean equipment thoroughly before first use. (See general cleaning instructions.)
2. Check rating label for your model designation and electrical rating.
3. Locate equipment on level counter and plug into a grounded outlet so the plug is accessible. (See
individual description for electrical loads.) On units bearing the CE marking, the appliance must be
connected by an earthing cable to all other units in the complete installation and, hence, to an
independent earth connection.
4. Install heat lamp in lamp holder at top rear of cabinet.
5. Slide drawer into slot at base of cabinet.
6. Install kettle by inserting locking hinge pin through holes in support bracket and kettle.
7. Insert kettle plug into ceiling mounted receptacle. Twist plug to lock.
8. Install kettle hinged covers by inserting tabs into support bracket slots. Cover with lifting knob must
be installed on operator side of kettle.
9. Install acrylic doors.
Latching Bracket
Lifting Arm
Cover
Latching Handle
Kettle
Locking Hinge Pin
Twistlock
Plug
Stirrer Assy
Support Bracket
MPC-1A PC-1A
Support Bracket
Lifting Knob
Hinged Cover
Latching Handle
Locking Hinge Pin
Twistlock Plug
Kettle