Filter
Top Products
5
Before cleaning the appliance, always switch off the appliance and unplug it, or put the house
fuse or switch off on the circuit breaker.
In case of malfunction
If a malfunction occurs, please look first in the “Trouble Shooting” section for help. If the informa-
tion given there does not help, ask your supplier for help. Under no circumstances should you
attempt to repair the appliance yourself, as repairs carried out by inexperienced persons may
cause injuries or serious malfunctions.
Installation
Installation Location
Before installing, carefully read the instruction in order to avoid a certain number of problems
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight etc.
Maximum performance and safety are guaranteed by maintaining the correct indoor temperature
for the class of unit concerned, as specified on the rating plate.This application perform well from
N to ST.The Appliance may not work properly if it is left for a longer period at a temperature above
or below the indicated range
IMPORTANT! -There is a need of good ventilation around the fridge for easy dissipation of heat,
high efficiency of refrigeration and low power consumption.For this purpose,sufficient clear.space
should be available around the fridge. It is advisable for there to be 75mm separating the back of
the fridge to the wall,at least 100mm of space at its two sides, height of over 100mm from its top
and a clear space upfront to allow the doors to open 160.
Climate class
Ambient temperature
SN
to
10
C
+
32
C
+
N
ST
T
to
16
C
+
32
C
+
to
16
C
+
38
C
+
to
16
C
+
43
C
+
Appliances must not be exposed to rain.Sufficient air must be allowed to circulate in the lower rear
section of appliances,as poor air circulation can affect performance.Built-in appliances should be
positioned away from heat sources such as heaters and direct sunlight.