Artech USA 25W Range User Manual


 
JACKS
1. FOOT SW. jack : Connects foot switch (push on / push off)(not include) to switching
[DRIVE] channel to [NORMAL] channel
2. INPUT jack : Plug from your guitar here.
3. PHONES, REC jack : Connects earphones, using stereo 1/4" plug. Connects stereo
or mono mini plug(1/4") for line out to the other amp or recorder.
4. AUX INPUT jack : Connects stereo mini plug(1/4") from music output of MP3, CDP or PC
(Notice : Aux input jack can not work when guitar input jack is empty.)
DRIVE CHANNEL
1. CONTOUR : Adjust tone shape < - : crunch> <+ : heavy >
2. VOLUME : Adjust [DRIVE] channel volume.
3. GAIN : Distortion gain of [DRIVE] channel
4. LOW, HIGH : Adjust level of low frequency range and high frequency range.
NORMAL CHANNEL
1. CONTOUR : Adjust tone shape < - : clean and bright > <+ : warm >
2. VOLUME : Adjust [NORMAL] channel volume.
3. BASS / MIDDLE / TREBLE : Adjust level of low, middle and high frequency range.
4. CHANNEL SELECT SWITCH : Select DRIVE channel and NORMAL channel
(Notice : Foot switch is enable when DRIVE channel is selected)
REVERB FUNCTION
1. REVERB : Adjust level of reverb effect
2. TIME : Adjust duration tiom of reverb
TUNER FUNCTION
1. TUNER SWITCH : On/ off tuner function.
(Notice : Mute the output automatically when tuner is ON.)
POWER
1. POWER SWITCH : Switching the power on/off.
Make sure that the volume control is set to zero position before power
on and off to reduce damage to amplifier and/or hearing ability
2 . AC INLET (Back panel) : Plug the AC power
3. FUSE HOLDER (Back panel) : Fuse for AC power
Model
Dimension(mm)
Speaker(s)
Output (RMS)
Power consuption
G50R, G50RT
D220 / H320 / W460
2 X 8 inch, 4ohm
50 watt
110 VA
G35, G35R, G35RT
D220 / H360 / W360
1 X 10 inch, 8ohm
35 watt
77 VA
G25, G25R, G25RT
D220 / H280 / W360
1 X 8 inch, 8ohm
25 watt
55 VA
[RT] model
[R] model
[Basic] model
FUSE
1A / 250V
0.5A/250
V
VOLTAGE
100V ~ 125V
210V ~ 240
V