Filter
Top Products
Page 7
PRPR
PRPR
PR
OGRAMSOGRAMS
OGRAMSOGRAMS
OGRAMS
To select a program, simply press the Program button until the indicator light behind the desired program glows. The
programs are described below:
Heavy Wash (160° F or 130° F)
For the heaviest soiled loads, such as pots, pans, casseroles, etc.
Normal Wash (130° F or 140° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly
soiled pans.
Quick (85° F or 120° F)
For lightly soiled loads that are washed immediately after use. This
program is good for delicate items, such as fine china and crystal,
but you should set the temperature to low and dry the dishes without
heat.
Rinse and hold
To rinse dishes that you plan to wash later that day.
Temperature
The dishwasher has two temperature options for each wash program, as shown above. When this button
is set on the high temperature, the main wash is heated to the higher temperature for the selected
program. If it is set to low, the main wash is heated to the lower temperature. The indicator light will glow
only when the high temperature is selected.
Drying
This option speeds up the drying process by raising the temperature in the final rinse to 160° F to heat
the dishes and tank before the drying cycle begins. The indicator light will glow only when this option is
activated.
THE CONTRTHE CONTR
THE CONTRTHE CONTR
THE CONTR
OL POL P
OL POL P
OL P
ANELANEL
ANELANEL
ANEL
Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,
simply press the appropriate button. After you have selected the desired wash program and options, press Start/
Stop.
STST
STST
ST
ARAR
ARAR
AR
T/STT/ST
T/STT/ST
T/ST
OP BUTTOP BUTT
OP BUTTOP BUTT
OP BUTT
ONON
ONON
ON
Once you have selected the wash program and
temperature and drying options, press this button to
start the dishwasher. (Make sure the door is securely
closed.) The indicator light around the button will glow
progressively as the program goes through each cycle.
When the program is complete, the lights will glow all
the way around the button.
OPTIONSOPTIONS
OPTIONSOPTIONS
OPTIONS
To select an option, simply press the appropriate option button. The options are described below.
OPERAOPERA
OPERAOPERA
OPERA
TING INSTRTING INSTR
TING INSTRTING INSTR
TING INSTR
UCTIONSUCTIONS
UCTIONSUCTIONS
UCTIONS
Program Times
The program times may not always be the same because of variations in the household hot water temperature. The
dishwasher heats the water to the proper temperature for the program selected; so if the temperature of the water
entering the dishwasher is too low, the dishwasher will run longer because it takes longer to heat the water. Raising
your water heater setting could help to shorten the cycle times.
Program button
Program indicator
lights
Start/Stop button
Program
progression
indicator lights
Temperature
button
Drying
button
Power button (on the top side of the control panel)
“The Normal Wash program is
used for energy testing and
should be used for normal or
lightly soiled loads. When
washing dishes that are more
heavily soiled, use a longer
program with higher
temperatures such as Heavy
Wash.”
POPO
POPO
PO
WER BUTTWER BUTT
WER BUTTWER BUTT
WER BUTT
ONON
ONON
ON
Use this button to turn the main power to the unit
on and off. The location of the power button is
illustrated above.