Filter
Top Products
Page 7
PRPR
PRPR
PR
OGRAMSOGRAMS
OGRAMSOGRAMS
OGRAMS
To select a program, simply press the program button until the indicator light for the desired program comes on. The programs
are described below:
Pots and Pans (170°/Sani or 140° F)
For the heaviest soiled loads, such as casseroles, sauce pans, etc.
Heavy Wash (160° F or 130° F)
For heavily soiled loads, such as pots, pans, casseroles, etc.
Normal Wash (130° F or 140° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans.
Delicate Wash (105° F or 120° F)
For delicate items, such as fine china and crystal, that are washed immediately
after use. When using this program, you should set the temperature to low and dry
the dishes without heat.
Quick Wash (85° F or 120° F)
For lightly soiled loads that are washed immediately after use. This program can
also be used for delicate items, but you should set the temperature to low and dry
the dishes without heat.
Rinse and Hold
To rinse dishes that you plan to wash later that day.
Temperature
The dishwasher has two temperature options for each wash program, as shown above. When this button is
set on the high temperature, the main wash is heated to the higher temperature for the selected program. If
it is set to low, the main wash is heated to the lower temperature. The indicator light will glow only when the
higher temperature is selected.
Delayed Start
This button allows you to delay starting the dishwasher for five hours. Press this button then press Start. The
button will glow when Delay Start is selected. To cancel Delay Start, hold down the Start/Stop button for three
seconds.
Drying
This option speeds up the drying process by raising the temperature in the final rinse to 160° F to heat the
dishes and tank before the drying cycle begins. The indicator light will glow only when this option is activated.
THE CONTRTHE CONTR
THE CONTRTHE CONTR
THE CONTR
OL POL P
OL POL P
OL P
ANELANEL
ANELANEL
ANEL
Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,
simply press the appropriate button. After you have selected the desired wash program and options, press Start/
Stop.
OPTIONSOPTIONS
OPTIONSOPTIONS
OPTIONS
To select an option, simply press the appropriate option button. The options are described below.
OPERAOPERA
OPERAOPERA
OPERA
TING INSTRTING INSTR
TING INSTRTING INSTR
TING INSTR
UCTIONSUCTIONS
UCTIONSUCTIONS
UCTIONS
“The Normal Wash program is used
for energy testing and should be
used for normal or lightly soiled
loads. When washing dishes that
are more heavily soiled, use a
longer program with higher
temperatures such as Heavy Wash
or Pots and Pans”.
Program
button
Start/Stop
button
Power
button
Program
indicator
lights
Option buttons