Filter
Top Products
Page 9
SPECIAL SETTINGS MENU
Model D3530 has several special settings available, as
defined below. To access them, press the Menu button
until “Special Settings” displays then press Set.
Language
You can change the language in the display window to
one of the following:
English Swedish
French Danish
Spanish Norwegian
Russian Netherlands
Italian Finnish
To change the language, follow the steps below:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Language” displays.
3. Press Set until your language choice displays.
4. Press Menu to confirm your selection.
End-of-Program Buzzer Volume
At the end of each program, a buzzer sounds. You can
adjust the volume of the buzzer as follows:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Buzzer” displays.
3. Press Set until your volume preference displays. Your
choices are 1 (softest) to 9 (loudest). A “0” indicates
the buzzer is off.
4. Press Menu to confirm your selection.
Celsius or Fahrenheit
You can change the temperature on the display window
from Celsius to Fahrenheit and vice versa. To do this,
follow the steps below:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “°C” or “°F” displays.
3. Press Set until your preference displays.
4. Press Menu to confirm your selection.
Activating the Child-Safe Button
This model can be programmed not to start unless the
Start button is held down for three seconds.
To set the child lock feature, follow the steps below:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until Child Lock displays.
3. Press Set to turn the feature on.
3. Press Menu to confirm you change.
A key symbol appears in the display when the child lock
is active. To deactivate the child lock, press the Set and
Menu buttons simultaneously. You can then select the
program and options and press Start to start the unit.
The child lock comes back on automatically after three
minutes.
To permanently deactivate the lock, repeat the above
steps.
Machine Information
You can view how much water the machine used the
last time it was operated and how many times it has
been used since it was new. To do this, follow the steps
below.
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Machine Information”
displays.
3. Press Set to view the water usage (in litres).
4. Press Set again to view the number of times the
machine has been used.
4. Press Menu to exit.
RESTORING FACTORY-DEFAULT
SETTINGS
You can easily restore the factory default settings (except
language) by following the steps below:
1. Turn off the power. Wait approximately 5 seconds.
2. Hold in the Program button while pressing the main
power button.