Asko D3731XL Dishwasher User Manual


 
Page 8
SPECIAL SETTINGS MENUSPECIAL SETTINGS MENU
SPECIAL SETTINGS MENUSPECIAL SETTINGS MENU
SPECIAL SETTINGS MENU
Model D3731 has several special settings available,
as defined below. To access them, press the Menu
button until “Special Settings” displays then press Set.
Language
You can change the language in the display window to
one of the following:
English French
Swedish German
Danish Italian
Norwegian Spanish
Finnish Netherlands
Russian
To change the language, follow the steps below:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Set until your language choice displays.
3. Press Menu to confirm your selection.
4. Keep pressing Menu until the display says “Exit”.
Next, press Menu once more and you will return to
the main display.
For direct access to the language menu, follow the steps
below:
1. Turn off the machine with the Power button.
2. Press and hold the Set button and then turn the
machine on again.
3. Press the Set button until your language choice
displays.
4. Press the Menu button to confirm your selection.
5. Keep pressing the Menu button until the display says
“Exit”. Next press the Menu buttononce more and
you will leave the Special Settings Menu.
End-of-Program Buzzer Volume
At the end of each program, a buzzer sounds. You can
adjust the volume of the buzzer as follows:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Buzzer Volume” displays.
3. Press Set until your volume preference displays.
Your choices are 1 (softest) to 9 (loudest). A “0”
indicates the buzzer is off.
4. Press Menu to confirm your selection.
5. Keep pressing Menu until the display says “Exit”.
Next, press Menu once more and you will return to
the main display.
Celsius or Fahrenheit
You can change the temperature on the display window
from Celsius to Fahrenheit and vice versa. To do this,
follow the steps below:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Temperature unit” displays.
3. Press Set until your preference displays.
4. Press Menu to confirm your selection.
5. Keep pressing Menu until the display says “Exit”.
Next, press Menu once more and you will return to
the main display.
Activating the Child-Safe Button
This model can be programmed not to start unless the
Start button is held down for three seconds.
To set the child lock feature, follow the steps below:
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Child Lock” displays.
3. Press Set to turn the feature on/off.
4. Press Menu to confirm your change.
5. Keep pressing Menu until the display says “Exit”.
Next, press Menu once more and you will return to
the main display.
A key symbol appears in the display when the child lock
is active. To deactivate the child lock, press the Set and
Menu buttons simultaneously. You can then select the
program and options and press Start to start the unit.
The child lock comes back on automatically after three
minutes.
To permanently deactivate the lock, repeat the above
steps.
Water Consumption / no. of cycles
You can view how much water the machine used the
last time it was operated and how many times it has
been used since it was new. To do this, follow the steps
below.
1. Press Menu until “Special Settings” displays then
press Set.
2. Press Menu again until “Water Consumption”
displays.
3. Press Set to view the number of times the machine
has been used.
4. Press Set again to view the water usage (in litres).
5. Keep pressing Menu until the display says “Exit”.
Next, press Menu once more and you will return to
the main display.
RESTREST
RESTREST
REST
ORING FORING F
ORING FORING F
ORING F
AA
AA
A
CTCT
CTCT
CT
OROR
OROR
OR
YY
YY
Y
--
--
-
DEFDEF
DEFDEF
DEF
AA
AA
A
ULUL
ULUL
UL
T SETTINGST SETTINGS
T SETTINGST SETTINGS
T SETTINGS
You can easily restore the factory default settings (except
language) by following the steps below:
1. Turn off the power. Wait approximately 5 seconds.
2. Hold in the Program button while pressing the main
power button.
3. Release the program button.