Filter
Top Products
11
Pro Rack Type Modelers or Preamps
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
Using two Reactor
50 112/212s
Install blank
templates onto the
DS-1 docking
units.
Replace the DS-1’s back
into the docking bays
located in the top of the
Reactors making sure that
the dock locks click into
position.
Plug the Left and Right
outputs of your Pro-
Rack style modeler or
preamp into the pair of
R eactor’s R ETU R N
inputs.
If using outboard effects
pedals or devices with
your modeler, connect
them as normal per the
m anu facturer’s
instructions
It is a good idea
to make sure
the output
levels are
turned down on
your modeler.
If using outboard effects
pedals or devices with
your modeler, connect
them as normal per the
m anu facturer’s
instructions.
Turn the Reactors power switches to
the ON position (they should light
up).
Bring up the levels on your modeler
and switch to some of your favorite
presets.