Filter
Top Products
13
? Turn the leveling screws up to the base to avoid damage.
? Tape the door shut.
? Be sure the unit stays secure in the upright position during transportation. Also protect the
outside of unit with a blanket, or similar item.
? Energy Saving Tips
? The unit should be located in the coolest area of the room, away from heat producing appliances,
and out of the direct sunlight.
? Let hot foods cool to room temperature before placing into the unit. Overloading the unit forces
the compressor to run longer.
? Be sure to wrap foods properly, and wipe containers dry before placing them into the unit. This
cuts down on frost build-up inside the unit.
? Unit storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the unit less efficient.
? Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
? Replacing Your Light Bulb
NOTE:
All parts removed must be saved to do the replacement of the light bulb.
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading
into the refrigerator at the main power supply. Failure to do so could result in electrical shock or
personal injury.
? Unplug the AC power cord from the wall.
? Remove the screw with a Phillips screw driver.
? Remove the light bulb cover.
? Remove the bulb.
? Replace with a 10 watts bulb that is the same
shape and size.
? Replace the light bulb cover and tighten screw.