Filter
Top Products
7
Refrigerator Section
• 2 wire shelves
• Instruction Manual
INSTALLATION INSTRUCTIONS
Before Using Your Compact kitchen
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
Kitchen Section
• 1 Wire Shelf
• Strainer
• Strainer Plug
• Backsplash and Assembly Screws
• Instruction Manual
• Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Energy Saving Tips
• The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
Installation of Your Compact Kitchen
NOTE:
1. In order to remove shelves of refrigerator, a clearance A of 10 inches is
required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet.
Figure No. 1