9
Refrigerator Section
? 2 wire shelves
? 1 crisper with glass lid
? Instruction Manual
INSTALLATION INSTRUCTIONS
? Before Using Your Compact kitchen
? Remove the exterior and interior packing.
? Check to be sure you have all of the following parts:
Kitchen Section
? 2 Wire Shelves
? Faucet Set
? Strainer
? Strainer Plug
? Backsplash and Assembly Screws (Only for model CK30 -1)
? Instruction Manual
? Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
? Clean the interior surface with lukewarm water using a soft cloth.
? Energy Saving Tips
? The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
? Installation of Your Compact Kitchen
? To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage
NOTE:
1. In order to remove crisper and/or shelves of refrigerator, a clearance A of
10 inches is required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet.
Figure No.
1