Filter
Top Products
7
Refrigerator Section
2 wire shelves
1 crisper with glass lid
Instruction Manual
INSTALLATION INSTRUCTIONS
Before Using Your Compact kitchen
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
Kitchen Section
2 Wire Shelves
Faucet Set
Strainer
Strainer Plug
Backsplash and Assembly Screws (Only for model CK30-1)
Instruction Manual
Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Energy Saving Tips
The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
Installation of Your Compact Kitchen
NOTE:
1. In order to remove crisper and/or shelves of refrigerator, a clearance A of
10 inches is required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an un
p
rotected wood or metal cabinet.
Fi
g
ure No. 1