Avanti DW182ESS Dishwasher User Manual


 
4
¾ Parts Supplied
Two #8 Philips flat head wood screws, 5/8” long to secure dishwasher to
underside of countertop or to side of cabinetry. (Taped to top or side of
dishwasher.)
¾ Materials You Will Need
Ferrule, compression nut and 90º Elbow (3/8”
NPT external thread on one end, opposite end
sized to fit water supply)
Thread seal tape
UL listed wire nuts
Materials For New Installations Only:
Air gap for drain hose, if required.
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection
Hand shut-off valve (recommended)
Water line 3/8” min. copper or ½” min. Plastic
(plastic must be tested for temperature and
pressure).
Coupler for extending drain line, if applicable.
¾ Tools You Will Need
Phillips head screwdriver
¼” and 5/16” nutdriver
6” adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when
flushing the line
15/16” socket (optional for skid
removal)
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set