Filter
Top Products
24
¬ ULIFT-UP COOKTOP
You can access the area beneath of the cooktop for
cleaning purposes by lifting up the cooktop. In order to
do:
• Hold the cooktop from front left and right corners of
cooktop and pull it up.
• After lifting up the cooktop high enough, set the
support rod into place as shown.
• Leave the cooktop on the tip of support rod.
• Wipe with warm soapy water. Use a soapy steel-
wool pad on heavily soiled areas.
• To lower the cooktop, lift the cooktop holding from
the front edge. Replace the support rod to its
previous place. Lower the cooktop in its place.
During replacement of the cooktop, be sure that the
front edge of cooktop covers the upper edge of
control panel.
NOTE: Do not drop the cooktop. Personal injury or
damage to the cooktop frame could result.
¬ REMOVABLE STORAGE DRAWER
For cleaning, you can remove the drawer by pulling it out until the stop
point and lifting it up.
Never store any flammable material in the drawer.
¬ UREPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be disconnected
from the power supply.
• Let the oven cavity and broil burner cool down.
• Switch off the electric supply.
• Remove the protective cover.
• Unscrew and replace the bulb with a new one suitable for high temperature (300°C ~ 570°C)
having the same specifications: 240V 60Hz, 15W, E14.
• Replace the protective cover.
NOTE: Oven bulb replacement is not covered by your guarantee.