Filter
Top Products
11
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your ice
maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a
longer period of time, you need to take the proper steps to disconnect your appliance.
PROBLEMS WITH YOUR ICE MAKER?
You can solve many common ice maker problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
Problem
Possible Cause
Suggested Solutions
The compressor works
abnormally with a buzzing
Noise.
The voltage is lower than
recommended.
Stop the ice maker and do not restart
until the voltage is normal.
Water shortage indicator
Light is on.
There is not enough water in
the reservoir.
Press the ON/OFF button, fill with water,
wait 3 minutes and press the power
button again to restart.
Ice full indicator light is on. Ice storage cabinet is full to
the top.
Remove some of the ice.
Indicator lights are off.
Blown fuse/ no power/blown
breaker
Replace fuse / turn power on.
The ice made is too large
and with pieces sticking
together.
The water temperature in the
storage tray or ambient is too
low.
Stop the machine and reset the ice
making cycle. Restart the machine after
turning it off.
Conditions for ice making
cycle are right but no ice is
made.
Refrigerant leaks/ sealed
system is blocked.
Replace unit.