Filter
Top Products
9
OPERATING YOUR WINE CHILLER
It is recommended you install the appliance in a place where the ambient temperature is between
72º - 78ºF (22º - 26ºC). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 39º - 68º F (4 – 20ºC) may not
be reached. Your wine chiller is designed to operate with at a range of 39º - 68º F (4 – 20ºC).
Recommended Temperatures for Chilling Wine.
Red Wines 58 - 65 ºF 14 - 18 ºC
Dry / White Wines 48 - 57 ºF 10 - 13 ºC
Rose Wines 49 - 51 ºF 9 - 11 ºC
Sparkling Wines 40 - 47 ºF 5 - 8 ºC
CONTROL PANEL LOCK
Your Wine chiller is equipped with an automatic Control panel lock function. This function will
prevent any unwanted changes to your temperature or power settings.
The lock function will activate automatically 12 seconds after the last time a button is pushed on
the control panel.
To unlock the control panel lock press and hold the (UP) and the (DOWN) buttons
simultaneously for 3 seconds the control panel will beep once indicating that the control panel is
active and the settings can be changed.
ON/OFF POWER
To turn ON or OFF the appliance, press the
button/mark and hold for 3 seconds.
SETTING THE TEMPERATURE CONTROL
You can control the internal temperature independently by using the control panel for that side.
You can press UP and DOWN buttons/marks to control the internal temperature.
The degrees indicators will appear in the display window.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark
once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
DOWN button/mark once.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the wine chiller is running for a few hours everything will be back to normal.
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF
/
ºC
button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window.