Filter
Top Products
11
¬ DOOR LOCK
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock
and turn it counterclockwise to lock the door. To lock the door do the reverse operation making sure
metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
¬ SHELVES
The appliance is equipped with the wired shelves. You can
move the shelves out and in smoothly.
• To prevent damaging the door gasket, make sure to
have the door all the way opened when pulling the
bottom shelf out of the rail compartment.
• For easy access to the storage content, you can pull
the shelf approximately 100% out of the rail
compartment, however this unit was designed with a
stopper on each side of the shelf track to prevent
bottles from falling.
• When removing the shelf out of the inner rail, make
sure to remove all items first. Then pull the shelf until
it is stopped by the stopper, and then lift the shelf. In
order to replace the shelf, repeat steps described
above in reverse.
PULL-OUT ROLLER SHELVES
• To prevent damaging the door gasket, make sure to have the door all the way opened when
pulling shelves out of the rail compartment.
• For easy access to the bottles, you must pull the shelves approximately 1/3 out of the rail
compartment.
• To remove the shelves out of the rail pull each shelf approximately 1/3 out. Use a long flat
screwdriver to press down the right plastic notch as shown in Figure A and at the same time lift
the left plastic notch as shown in Figure B. Then proceed to pull out the shelf slowly. Contact our
service department if assistance is needed.
Figure A Figure B