Filter
Top Products
10
ON/OFF POWER
To turn ON or OFF the appliance, press the
button/mark and hold for 2 seconds.
Control Panel Lock.
Your Wine chiller is equipped with an automatic Control panel lock function. This
function will prevent any unwanted changes to your temperature or power settings.
The lock function will activate automatically 12 seconds after the last time a button is
pushed on the control panel.
To unlock the control panel lock press and hold the (↑)andthe(↓)buttonsfor3
secondsthecontrolpanelwillbeepandblinkonceindicatingthatthecontrolpanelisactive
andthesettingscanbechanged.
SETTING THE TEMPERATURE CONTROL
You can press the left side UP and DOWN buttons/marks to control the internal temperature of the
upper zone and press the right side UP and DOWN buttons/marks to control the internal temperature
of the lower zone.
The degrees indicators will appear in the display window marked UPPER ZONE and LOWER ZONE.
The temperature range of LOWER ZONE is 55 ~ 65 ºF which is suitable for storing white and red
wines. The temperature range of UPPER ZONE is 40 ~ 55ºF which is suitable for storing sparkling
and white wines.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark
once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN
button/mark once.
When you store mostly red wines, you should store them in the LOWER ZONE, the temperature
which you control by pushing the above UP and DOWN buttons/marks need to be set at between
58 to 65 F and the red LED lamp under “RED” marking will be lit
When you store mostly white wines, you can store them in the UPPER ZONE or LOWER ZONE.
When you use the LOWER ZONE, the temperature can be set at between 55 to 57 F and the
green LED lamp under “WHITE” marking will be lit. When you use the UPPER ZONE, the
temperature can be set at between 48 to 55 F and the green LED lamp under “WHITE” marking
will be lit.
When you store mostly sparkling wines, you should store them in the UPPER ZONE, the
temperature needs to be set at between 40 to 47 F and the yellow LED lamp under “SPARKL”
marking will be lit.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
The LED readout will show the original temperature set previously (the preset temperature at the
factory for UPPER ZONE is 50ºF and for LOWER ZONE is 60ºF).
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window for each zone.