Filter
Top Products
10
SPECIAL FEATURES
Your unit is equipped with an ECONOMY (Vacation) MODE. This operating
mode will cut energy consumption by turning off all indicator lights and LED
display while in the ECON mode.
To activate the ECON mode press and hold the ECON selector button until
the green indicator light is illuminated.
To deactivate the ECON mode and return to normal operation, simply press
the ECON selector button again.
A special added feature is a POWER LOSS / OUTAGE indicator and alarm.
In the event of a power outage or loss the PWR LOSS indicator will flash
intermittently and a single alarm will sound.
To reset the alarm simply press the RESET button shown below.
If at anytime the door has been left open or ajar for more than 5 minutes,
the DOOR indicator and alarm will be activated.
The DOOR indicator light will flash intermittently and an alarm will sound
every 60 seconds.
To reset the alarm simply close the door properly or press the RESET
button shown below.
An added feature to your wine cellar is the FILTER replacement indicator.
Once your unit has been in use for 12 months, the FILTER indicator light will
flash intermittently to remind you to change the filter.
After changing the filter press the RESET button shown below to restart the
timing program to remind you again in another 12 months to change the
filter.
The RESET button is used to set-up any of the warning indicators shown
above (PWR LOSS, DOOR, FILTER). Once pressed the above indicators
are reset and returned to their ready state.
¬ STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able
to store may vary.
NOTE:
Capacity:
Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles
and include bulk storage.
¬ INTERIOR LIGHT
• You can turn the interior light on or off by pushing the button marked
¬ CONTROL PANEL LOCK
• Your Wine chiller is equipped with an automatic Control panel lock function. This function will
prevent any unwanted changes to your temperature or power settings.
• The lock function will activate automatically 12 seconds after the last time a button is pushed on
the control panel.
• To unlock the control panel lock press and hold the (UP) and the (DOWN) buttons
simultaneously for 3 seconds the control panel will beep once indicating that the control panel is
active and the settings can be changed.