Filter
Top Products
Universal Warmer Maintenance
8
Troubleshooting
Refer to the table below for troubleshooting information.
Problem Cause Possible Solution
Noisy fan
Fan blade is dirty or fan
bearings are failing
Contact an authorized BKI service agent for
corrective action.
No power to unit.
Make sure that the circuit breaker and switch at the
power supply are supplying power to the unit. If
problem persists, contact licensed electrician.
Fan has overheated and
cut off
Wipe the dust from the air intake louvers to allow
proper airflow and prevent fan overheating. Turn
the power switch off. Wait 60 seconds. Turn the
power switch back on.
Perforated pan is not
heating
Heating coil has failed Contact an authorized BKI service agent for
corrective action.