Filter
Top Products
7
Front Mounted Pulse Button
For short duration grinding, the PRECISO is
equipped with a front mounted pulse button. It can
be used for grinding directly into an espresso-brew-
ing basket. Remove the grounds bin and position
the espresso-basket inside the grinder directly
below the pulse button or position the espresso
basket in the Portaholder which is included (see
photo). Push and hold the pulse button to grind.
Grinding will stop when the button is released.
PortaHolder
™
Installation
Insert the PortaHolder
™
into the grinder. Then in-
sert your porta lter into the PortaHolder
™
by tipping
the basket down so the lip of the porta lter slides
under and gets hooked by the hook bracket at the
top rear of the PortaHolder
™
while the base of the
basket is supported by the two metal ngers that
extend from the
PortaHolder
™
If the porta lter bas-
ket is not horizontal in the holder, remove the screw
and move the bracket higher or lower in order to
level the portalter basket.
To use, insert your porta lter into the PortaHold-
er
™
. Turn the timer to the desired time. The grinder
will run for the time set and stop automatically.
Note: Use caution not to overll the porta lter. If you overll the lter
coffee will back up and jam your grinder.