Filter
Top Products
RLM W6 Serial Commands
Rev. 6d
Page 1
3 / 14
Applicable” in some specific conditions.
No
te1: Not applicable in standby mode.
Note2: Not applicable in standby mode or without signal locked.
Note3: Not applicable when picture mute is on.
Note4: Only valid when source is one of Composite, S-Video and RGB-S.
Note5: Native aspect ratio is not applicable when zoom is set to “Zoom”, Letterbox aspect
ratio is not applicable when the input format is one of formats as listed in appendix 2.
Note6:
Selection “Zoom” is not applicable when aspect ratio is set to Native.
Note7:
Only applicable when source is one of RGB D-15, YUV1 and RGBHV/YUV2.
Note8: Not applicable when color space is set to custom.
Note9: pip.sel can NOT be set to 0.
Note10: Not applicable when pip is off.
Note11: Not applicable when lamp is cooling.
Note12: Not applicable when eco.net.pow is on.
Note13: Only MCU version number will be read back in standby mode.
Note14: Not applicable when the internal pattern is displayed.
Note15: The summation of the absolute value of h.keystone and v.keystone should not be
greater than 350.