Beko D 9400 NM Refrigerator User Manual


 
6
Instructions for use
Replacing the interior
light bulb
Warning!
Light bulb must be changed by on
authorized service personnel.
Should the light fail, switch off at the socket
outlet and pull out the mains plug.
Then ensure the bulb is screwed securely in the
bulb holder. Replace the plug and switch on.
If the light still fails, obtain a replacement E14
screw-cap type 15 Watt (Max) bulb from your
local electrical store and then fit it .Carefully
dispose of the burnt-out light bulb immediately.
Reversing the door
opening direction
(Fig.13)
It is possible to change the opening direction
of your refrigerator.
You may prefer to perform this your
self, but you have the option to call
our service department
Cleaning and care
1. We recommend that you switch off the
appliance at the socket outlet and pull out the
mains plug before cleaning.
2. Never use any sharp instruments or abrasive
substances, soap, household cleaner, detergent
or wax polish for cleaning.
3. Use luke warm water to clean the cabinet
of the appliance and wipe it dry.
4. Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to one
pint of water to clean the interior and wipe it
dry.
5. Make sure that no water enters the
temperature control box.
6. If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar.
7. We recommend that you polish the metal
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to protect
the high quality paint finish.
8. Check door seals regularly to ensure they
are clean and free from food particles.
9. Never:
Clean the appliance with unsuitable material;
eg petroleum based products.
Subject it to high temperatures in any way,
Scour, rub etc., with abrasive material.
10. Removing the door shelves :
To remove a door shelf, remove all the contents
and then simply push the door shelf upwards
from the base.