Filter
Top Products
5
Maintenance and Cleaning
4
Wash the blender jar and its
associated parts in warm sudsy
water after each use.Dry all parts
throughly before storing.These
parts are not dishwasher safe.
Powdered cleaners and abrasive
pads will damage the surface of
the parts.Remove stubborn soil
by soaking and wiping with soft
cloths and mild liquid cleaners.
NOTE: NEVER IMMERSE THE
BASE ASSEMBLY IN ANY LIQUID.
To clean the base, wipe clean with
a damp cloth.Allow to dry thor-
oughly before re-using or storing.
To prolong the life of blender
always:
1-Use it on a flat dry surface.
2-Have the lid in place when
blending.
3-Switch OFF “O” before you
scrape food down the inside of the
jar with a long handled spatula.
4-Make sure there is something in
the jar each time you switch “ON”.
The cutter bearing may be dam-
aged if run on “No-load”.
5-Cut cooked meats into one
centimeter squares before adding
into the jar.
6-Remember that a blender can-
not process raw meet.
7-Ensure that the food being
blended is not too thick or heavy
for the motor to handle.If it seems
to be having diffucultly, either
add a little liquid through the lid
or switch OFF “O”, remove the
lid and scrape the mixture down
towards the blade with a soft rub-
ber spatula.
8-Please DO NOT use the jar for
storing foods or beverages.
Figure 3 Figure 4 Figure 5