Filter
Top Products
5
food pusher to the lowest position.
Note: the meat piece should be
able to put into the hole of funnel
and no bone in them.
6. The max operation time shall
not exceed 1 minute and minimum
1 minute rest time must be main-
tained between two consecutive
cycles.
7. Place a clean container with
proper size under blade cover to
receive meat powder come from
the appliance.
8. Press the switch to “off” posi-
tion immediately when blocking
exists during blending, then press
down to “reverse” position, let the
unit turn clockwise, then release
immediately, when the switch
resets to “off” position, press the
switch to “on” position again, if
the blocking still exists, repeat the
operations until the blocking dis-
appears. When blending finishes,
unplug the power source.
9. Disassemble the blending pole
support assembly: press down
lock button properly with thumb
of left hand (see arrow 1 of Fig.3),
turn the blending pole support as-
sembly clockwise with right hand
then remove them (see arrow 2
of fig.3).
Caution: Ensure that the motor
unit is unplugged when disas-
sembling.
Fig.3
2
1