Filter
Top Products
EN
11
REPOSITIONING THE DOOR
Follow the step by step instructions and the diagram below. Numbers in brackets
refer to diagrams
1. Switch off at the socket outlet and
pull out the mains plug.
2. Remove all food, loose items and
fittings from inside the appliance and
door shelves.
3. Unscrew the bolts and remove
the upper and bottom hinges from the
cabinet and door.(1) (2)
4. Remove stoppers. (3) (4)
5. Fit the stoppers on the opposite
side. (5) (6)
6. Reposition the upper hinge on the
opposite side as bottom hinge (7)
7. Reposition the bottom hinge on
the opposite side as upper hinge. (8)
Locate the door and tighten the bolts
fixing the door.
To change door from R/H to L/H
please follow procedure below:
1.Carefully remove the lower then the
upper Torx screws that hold the door
to the hinges.
2.Open hinges fully then carefully
remove the self tap countersunk
screws holding the hinges to the
cabinet.
3.Remove the plastic covers from the
L/H hinge fixing points and carefully re
insert in the R/H holes.
4.Carefully place the self tap screws
into the new fixing points applying
gentle pressure until they start to
bite (at this point it may help to have
someone at the back of appliance to
support).
5.For ease of fixing we recommend
screwing all the way in, and then ease
back out.
6.Re fit hinge
7.Tighten the screws firmly.
8.Re fit door, loosely fixing the top
screws first, and then fit the lower
screws.
9.When all screws fitted; tighten firmly
and check door for alignment.