Beko CF393APW Freezer User Manual


 
FRE EZER OP ERATI ON
Temperature adjustment
The temperature of the freezer is adjusted by means of the knob assembled on the
thermostat, position „MAX” being the lowest temperature.
The achieved temperatures can vary according to the conditions of use of the appliance,
such as: place of the appliance, ambient temperature, frequency of lid opening, extent of
filling with food of the freezer. The position of the thermostat knob will change according
to these factors. Normally, for an ambient temperature of approx. 25
0
C, the thermostat
should be adjusted to the mild position.
We recommended that you check the temperature with a thermometer to ensure that the
Freezer is kept to the desired temperature. Remember you must take your reading very
quickly since the thermometer temperature will rise very rapidly after you remove it from
the freezer.
Please remember each time the lid is opened cold air escapes and the internal
temperature rises. Therefore never leave the lid open and ensure it is closed: immediately
after Food is put in or removed.
Indicator lights
The indicator light set is placed on the front side of the freezer for easy visibility.
By using the Thermostat Adjustment Knob (1), you can adjust the internal temperature of
the freezer.
Indicator lights mean the following:
- green LED – shows that the appliance is supplied with electric energy.
- red LED – lights if the temperature in the freezer is too high. The LED will operate 45
minutes after putting into operation of the freezer, then it must go off. If the LED comes
on during the operation, this may mean that a defect has occured.
- amber button and led – fast freeze is switched on.
6