Filter
Top Products
EN
8
INSTALLATION INSTRUCTIONS
1.Fitted the two plastic wall spacers
supplied onto the condenser at the
back of the appliance by rotating 1/4
turn.
2.Locate the appliance on a smooth
surface.
4.A special receptacle is supplied to
store the mains plug during transit. The
receptacle is fixed at the back of the
cabinet on the side of the compressor.
Gently remove the plug from the
receptacle. Never pull the mains cord,
you may damage the appliance. In case
of transportation, ensure you locate the
plug in the receptacle provided to
avoid transit damage.
5.The space in the room where the
appliance is installed must
not be smaller than 10 cubic metres.
6.Fit the front grille supplied with your
appliance as shown in
the diagram.
Plug receptacle
3.To ensure it is standing upright
adjust the two front feet by turning
clockwise or anti-clockwise, until it is
in firm contact with the floor. Correct
adjustment of feet avoids excessive
vibration and noise.