Beko CFD640W Refrigerator User Manual


 
EN
17
5 Using your refrigerator
Temperature Control And Adjustment
Operating temperatures are controlled
by the thermostat (see diagram) located
on the ceiling of fridge compartment.
Settings may be made from 1 to 5, 5
being the coldest position.
When the appliance is switched on
for the first time, the thermostat should
be adjusted so that after 24 hours, the
average fridge temperature is no higher
than +5°C (+41°F). We recommend you
set the thermostat half way between
the 1 and 5 setting and monitor to
obtain the desired temperature i. e.
towards 5 you will obtain a colder fridge
temperature and vice versa. Some
sections of the fridge may be cooler or
warmer ( such as the salad crisper and
the top part of the cabinet ) which is
quite normal.
The normal storage temperature of the
freezer should be -18°C (0°F). Lower
temperatures may be obtained by
adjusting the thermostat towards 5
position.
We recommend that you check
the temperature with an accurate
thermometer to ensure that the storage
compartments are kept to the desired
temperature.
Remember you must take your reading
very quickly since the thermometer
temperature will rise very rapidly after
you remove it from the freezer.
Please remember each time the door
is opened cold air escapes and the
internal temperature rises. Therefore
never leave the door open and ensure
it is closed immediately after food is put
in or removed.
In case of a temporary ice build up
in the fridge compartment, reduce the
thermostat setting to 1, monitoring
at the same time that the fridge
temperature is maximum +5 degrees
C [41 degrees F]. Once the ice build
up disappears and the appliance
starts auto defrosting again as normal,
then you may increase the thermostat
setting, if required.