Filter
Top Products
EN
9
Replacing The Interior Light
Bulb
Should the light fail to work, proceed
as follows.
1. Switch off at the socket outlet and
pull out the mains plug.
• You may find it useful to remove
shelves for easy access.
2. Use a flat tipped screwdriver to
remove the light diffuser cover by
inserting the blade in each of the two
recesses to prise off each side.
3. First check that the bulb hasn’t
worked loose by ensuring it is
screwed securely in the holder.
Replace the plug and switch on. If the
bulb works, replace the light cover by
inserting the rear lug and pushing up
to locate the front two lugs.
4. If the light still fails to work, switch off
at the socket outlet and pull out the
mains plug. Replace the bulb with a
new 15 watt (max) screw cap (SES)
bulb.
5. Carefully dispose of the burnt-out
light bulb immediately. Replacement
light bulb can easily be obtained from
a good local electrical or DIY store.