Filter
Top Products
EN
12
Water filter
(in some models)
Your refrigerator may be equipped with
an external or internal filter depending
on its model. To fit the water filter,
follow the instructions below referring
to the figures supplied:
Mounting the external filter
onto the wall
1. First, determine the location to
mount the external filter.
2. Then, determine the distance
between the filter and the tap
and filter and the water inlet
respectively. Prepare hoses at
required lengths.
3. Mount the filter connection kit onto
the wall by using a screwdriver and
attach the filter.
WARNING: Water filter must be hold
upright as shown in the figure. It is
critical to connect the water inlet and
outlet hoses on the filter correctly.
After connecting the filter, do not
consume the first 10 glasses of water.
WARNING: Never mount the filter
onto the refrigerator. Coolant pipes
might be pierced!
After connecting the filter, do not
consume the first 10 glasses of water.
WARNING: Never mount the filter
onto the refrigerator. Coolant pipes
might be pierced!