Beko CTb 9407 Ventilation Hood User Manual


 
EN
8
8
MAINTENANCE
Grease filters
CLEANING METAL CASSETTE GREASE FILTERS
The filters must be cleaned every 2 months, or more frequently
in case of particularly heavy use of the hood. Filters can be
washed in a dishwasher.
Pull out the sliding suction panel.
• Remove the filters one by one, after having disconnected the
relative fastening elements.
Wash the filters, taking care not to bend them. Let them get dry
before refitting them. (The colour of the filter surface may
change throughout the time but this has no influence to the fil-
ter efficiency).
• When refitting the filters, make sure that the handle is visible
on the outside.
Close the sliding suction panel.
Charcoal filter (Recycling version)
REPLACING CHARCOAL FILTERS
Warning: Turn the lights off and wait until the lamps cool down
before you change the odour filter.
• These filters are not washable and cannot be regenerated, and
must be replaced approximately every four months or more
frequently by particularly heavy use.
Pull out the sliding suction panel.
Remove the grease filters.
• Remove the saturated carbon filter by releasing the fixing
hooks
Fit the new filter by hooking it into its seating.
Replace the grease filters.
Close the sliding suction panel.
Lighting
LIGHT REPLACEMENT
28 W incandescent light.
Remove the metal grease filters.
• Unscrew the bulbs and replace them with new ones having the
same characteristics.
Replace the metal grease filters.