Filter
Top Products
EN
17
Sliding Body Shelves
Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to
a stop point when pulled towards front
to allow you reach the foods placed at
the back of the shelf; when it is pulled
after slightly lifted upwards at the
second stop point, the body shelf will
be released.
The shelf should be hold tightly from
the bottom as well in order to prevent
it from tipping over. The body shelf is
placed on the rails at the sides of the
refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed
backwards to seat it completely.
1
2
3
4
Humidity control in the
crisper
Humidity level can be adjusted by
sliding the humidity adjustment slider to
the right or left.
• If you want to maintain humidity in
this compartment, set the humidity
adjustment slider to the closed position.
(Right)
• If you want to eliminate humidity in
this compartment, set the humidity
adjustment slider to the open position.
(Left)
Egg tray
• You can install the egg holder to the
desired door or body shelf.
• Never store the egg holder in the
freezer compartment.