Filter
Top Products
20
GB
1033
Troubleshooting:
What to do if the dishwasher will not run
• Check that the mains plug is properly connected.
• Are all fuses working?
• Is the water supply fully turned on?
• Is the dishwasher door closed firmly?
• Have you pressed the On/Off button?
• Is the filter on the water intake and dishwasher clogged?
The cleaning results are unsatisfactory
Uncleaned Dishes
Disorderly placement
- Load your dishes as described in the manual.
Program selection
- For products with program selecting feature, choose a longer program that
washes in higher temperatures.
Blocked impellers
- Prior to starting the program, ensure by turning by hand that the upper and
lower impellers are freely rotating.
Clogged filters
- From time to time, remove the complete filter system as shown in the manual
and wash it under flowing water.
Misplaced or displaced filters
- After washing the filter system, replace them as shown in the manual.
Clogged impeller holes
- Take out and clean the impellers from time to time as shown in the figure.
Overloading the baskets
- Do not overload the baskets in excess of their capacity
Detergent kept under unsuitable conditions
- If you are using powder detergents, do not store them in humid places after
you open their boxes. Keep them in a closed container, if possible. For ease-
of-storing, we recommend you to use tablet detergents.
Inadequate detergent
- If you are using powder detergents, adjust the amount of detergent
according to the soiling degree of your dishes and/or program definitions. We
recommend you to use tablet detergents for optimum results.
6