Filter
Top Products
12
GB
! For level 5 and level 6 there is no
difference between hardness level
settings.
If the hardness of the water you
use is more than 80°dF (French
Hardness) or if you are using pit
water, we recommend that you use
filters and purifiers.
* If your tap water is below 9F
(French hardness), you do not need
to use special dishwasher salt in your
machine. In this case, salt indicator
light will be on continuously.
Open the door of the machine•
Press programme selection button •
when machine is switched off.
Keep programme selection button •
pressed and press on/off button
to turn your machine on. Do not
release the programme selection
button until the defined “Water
Hardness Level Indicator” of your
machine is displayed ( See Water
Hardness Level Adjustment Table )
Programme Follow-up indicators
light up continously when machine
enters into the water hardness
adjustment mode.
To adjust new Water Hardness •
Level: adjust the water hardness
level according to the “Water
Hardness Level Adjustment Table”
( See Water Hardness Level
Adjustment Table ) by pressing the
programme selection button again.
If you select a water hardness •
level other than stored in the
memory, programme follow up
indicators flash with an interval
of 1 second. The selected water
hardness level in indicated by the
Programme Selection indicators.
Press “Start/Pause/Cancel” button •
once to store the level you have
selected. Programme follow-up
indicators light up continuously
when the water hardness level is
stored.
Press the on/off button to turn off •
your machine.