Filter
Top Products
11
GB
Make sure your
dishwasher is perfectly
level using the adjustable
feet.
When the appliance is
correctly levelled, the
door will not catch on the
inner liner on either side
of the cabinet.
If the door does not
close correctly, loosen
or tighten the adjustable
feet, until the machine is
perfectly level.
Ensure that door furniture is fitted properly and check that the door does not catch
any other surface to ensure the door is closed smoothly.
15mm
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your
dishes. Your dishwasher has a special water softening system to remove the
hardness of the tap water. Setting this system correctly will increase the washing
effectiveness.
To nd out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness
will possibly be different. It is essential to reset the water
hardness in order to obtain optimum washing efciency.
Test Strip
Let the water
flow from your
tap for 1 minute.
Remove the
test strip from
its packing.
Fill a glass with
tap water and
dip the test strip
into water for 1
second.
Take the test strip
out of the water and
shake it.
Hold for
1 minute.
Set the water hardness level of your dishwasher
according to the result shown by the test strip.
b
a
e
1 minute
1 second
c
d f
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
5
How to use