Filter
Top Products
EN
15
Connection of Water Hose to
the Bottle
(in some models)
To connect water to the refrigerator
from a bottle, a pump is needed.
C Note: You may refer to the user
manual of the pump while making the
water connection.
Connection of the Water
Pipe to the Cold Water Mains
Line
(in some models)
If you want to use your refrigerator by
connecting it to the cold water mains
line,
you will have to connect a standard
1/2” valve connection fitting to the cold
water supply in your house. In case
Follow the instructions below after
connecting one end of the water
pipe coming out of the pump to
the refrigerator as described on the
previous page.
1. Finish the connection by pushing
the other end of the water pipe into
the water pipe inlet of the pump as
shown in the figure.
2. Put and fix the pump hose into the
bottle as shown in the figure.
3. After completing the connection, plug
in and run the pump.
To provide an efficient operation of the
pump, wait for 2-3 minutes after
starting the pump.
1b
1a
2