Filter
Top Products
EN
13
11- Fit the bottom hinge and
tighten the screws as shown in figure.
(10)
12- Fit the other front feet as
shown in figure. (11)
13- Rotate the top hinge 180°.
Unscrew the hinge pin and re-tighten it
to the opposite side. (12)
14- Fit the top hinge on the left
hand side bushing of the door. (13)
15- Locate and re-fit door to
bottom hinge pin. (14)
16- Re-fit the upper hinge on the
opposite side by using a flat headed
screwdriver. (15)
17. Fit front top panel plastic hinge
covers on the opposite sides. (16)
18- Adjust the two front feet if
necessary.
19- Check that door opens and
closes easily, it is aligned correctly and
there are no gaps allowing air into the
cabinet. If there are
gaps between the door seal and the
cabinet, adjust the door seal by gently
pulling away from the door using
fingers.
20- Check that all the hinge
screws are tightened. Avoid over
tightening the screws.
21- Put all items, fittings back in
the appliance.
22- Wait for at least 4 hours to
allow the system to settle before
switching on.
23-Once the correct storage
temperatures have been reached in
the appliance, put back all the food.