Beko TLD 673 APW Refrigerator User Manual


 
EN
18
Cleaning the water tank
Remove the water tank, open the
latches on both sides and detach the
top cover mechanism from the water
tank. Clean the water tank with warm
clean water, reinstall the top cover
mechanism and fasten the latches.
When installing the water tank, make
sure that hooks behind it fits securely
into the hangers on the door. Make
sure that parts removed during
cleaning (if any) are installed correctly
into their original locations. Otherwise,
water may leak.
Important:
Water tank and components of water
dispenser are not dishwasher-proof.
Water tray
Water that drips while using the water
dispenser accumulates in the drip tray
housing.Remove the drip tray firstly
pressing up from the front edge then
pulling towards yourself.Then clean
drip housing by a fabric or sponge that
has water absorbtion tendency.
UNLOCK LOCK
Safety lock for Water Dispenser
You may use the lock in order to avoid
small children tampering with the water
dispenser. To do this, slide the locking
latch from left to right as illustrated in
the figure. You must slide the latch
back to left position in order to use the
water dispenser.
To avoid accidental water dispensing,
we recommend you to lock the water
dispenser.
Maximum height of glass suitable for
use with Stored Water Dispenser is
16 cm which includes most of the
“Standard” pint glasses.