Filter
Top Products
EN
13
4 Before operating
Starting
Final Check
Before you start using the refrigerator
check that:
1. The front feet have been adjusted so
the appliance is level.
2. The interior is dry and air can circulate
freely around the outside of the
product.
3. Clean the interior as recommended
under “CLEANING AND CARE.”
4. Insert the plug into the wall socket
and switch on the electricity supply.
When the door is open the interior
light will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
6. We recommend that you set the
thermostat thermostat to 3 (three)
and monitor the temperature to
ensure the appliance maintains
desired storage temperatures (See
section Temperature Control and
Adjustment).
7. Do not load the appliance
immediately it is switched on. Wait
until the correct storage temperature
has been reached.
8. We recommend that you check
the temperature with an accurate
thermometer