Beko TSE 1283 Refrigerator User Manual


 
EN
20
7 Recommended solutions for the problems
Please review this list before calling the service. It might save you time and
money. This list includes frequent complaints that are not arising from defective
workmanship or material usage. Some of the features described here may not
exist in your product.
The refrigerator does not operate
Is the refrigerator properly plugged in? Insert the plug to the wall socket.
Is power available to the wall socket? If not, please check main power switch
board circuit breaker/fuse. Please reset circuit breaker and if trips again please
contact a qualified electrician.
Condensation on the side wall of the fridge compartment. (MULTI ZONE, COOL
CONTROL ve FLEXI ZONE)
Very cold ambient conditions. Frequent opening and closing of the door. Highly
humid ambient conditions. Storage of food containing liquid in open containers.
Leaving the door ajar.
Switching the thermostat to a colder degree.
Decreasing the time the door left open or using it less frequently.
Covering the food stored in open containers with a suitable material.
Wipe the condensation using a dry cloth and check if it persists.
Compressor is not running
Safety device for compressor may trip during sudden or interrupted power supply.
It may also trip when the refrigerator has been moved.
Your refrigerator will start running after approximately 10 minutes. Please call the
service agent if your refrigerator does not startup at the end of this period.
The fridge is in defrost cycle. This is normal for a full-automatically defrosting
refrigerator. Defrosting cycle occurs periodically.
Your refrigerator is not plugged into the socket. Make sure that he plug is inserted
tightly to the wall socket.
Are the temperature adjustments correctly made? There is a power failure. Call
your electricity supplier.
The fridge is running frequently or for a long time.