Filter
Top Products
Installing Your Cooker
Stabilising and Securing
Your cooker may come with a stability chain, if it does not
we recommend that you buy a stability bracket from your
local supplier, this will keep the cooker from moving and
will prevent damage to the flexible hosing at the back of
the cooker.
Your stability chain
Your cooker must be secured to a wall or a solid partition
behind the cooker.
Your stability bracket
You can buy a stability bracket from your supplier and it
can fitted as follows:
● Place the cooker in position and draw a pencil line level
with the front edge.
● Remove the cooker and mark off 450mm from the
pencil line to locate the front edge of the lower
bracket.
● Fix the bracket to the floor. Measure from floor level
to engagement edge in the back of the cooker and add
3mm.
● Assemble the underside of the top part of the bracket
to this height.
● See the drawings for the location of the bracket and
the recommended positioning.
Levelling
Once your cooker is secure:
Place a spirit level onto a baking tray, on an oven shelf.
These cookers are fitted with adjustable feet which will
allow you to adjust the height of the appliance until it is
level. The adjustable feet are at the rear of the cooker.
S
tability Hook
(not supplied)
R
ear of cooker
F
irmly fix chain
to cooker rear
S
tability chain to
be as short as
possible
Cooker stability chain not designed
with bracket engagement slot
Model viewed from rear
Locate stability bracket here
X
Rear
plinths