Filter
Top Products
3
Installing Your Cooker
Connecting the cooker For your own safety, we recommend that your cooker is installed by
competent electrician. The installation must comply with current I.E.E. Wiring
regulations
Warning: This appliance must be earthed
The cooker must be connected to the correct electrical supply as stated on
the voltage label, through a suitable cooker control unit incorporating a double
pole switch having a contact separation of a least 3mm in all poles. It must not
be connected to a 13amp plug.
We recommend you use 2.5mm² twin and earth cable to connect the cooker
to the mains supply
The cable should be connected to the mains terminal block as follows;
Connect the Green & yellow lead to the terminal marked
Connect the Brown lead to the terminal marked “L”
Connect the Blue wire to the terminal marked “N”
Ensure that the cable is clamped using the clamp provided.
Allow sufficient cable length for the cooker to be pulled out for cleaning, but
do not let it hang closer than 50mm (2”) to the floor.The cable can be looped
if necessary, but make sure that it is not kinked or trapped when the cooker
is in position.