Belshaw Brothers BARO-2E Oven User Manual


 
BELSHAW BROTHERS, INC.
Belshaw-Adamatic Bakery Group •
814 44th St NW, Suite 103, Auburn WA 98001
Phone: 206-322-5474 | 800-578-2547 Fax: 206-322-5474 • info@belshaw.com • www.belshaw.com
©11/2007 Product specications may be changed without notice. Always obtain current spec sheet at time of purchase.
Dimensions BARO-2E
Overall width 72” (1830 mm)
Overall height 104.5” (2655 mm)
Overall depth (inc. hood) 95.0” (2530 mm)
Depth at oor (not inc. hood) 62” (1575 mm)
Net weight 3380 lbs (1537 kg)
Shipping weight 4380 lbs (1991 kg)
Crate size 113”L x 70”W x 94” H
Crate volume 430 cu. ft.
Freight class 70
Electrical BARO-2E
120V-60-1 E-1 connection 12 A 1.5 kW
208V-60-3 E-2 connection 145 A 52 kW
240V-60-3 E-2 connection 125 A 52 kW
480V-60-3 E-2 connection 63 A 52 kW
BARO-2E: Double Rack Oven, Electric
INSTALLATION REQUIREMENTS
Requires on-site installation
KD shipment. When disassembled, can t through 36”
opening
Consult factory for shipment fully assembled
112” Floor to ceiling height required for tip-up
Non-combustible oor supported by non-combustible
structure
Zero clearance required from combustible surfaces on
side and back
ELECTRICAL
Two electrical connections
For Controls/Lift and rotate (E1 on diagram): 1/2” EMT,
120 VAC 1-Phase
For circulation blower and heaters (E2 on diagram):
1-1/4” EMT, 208-240V or 480V 3-Phase
VENTILATION
8” Round vent collar (consult local codes for installation
requirements)
800 CFM Roof vent (not included)
WATER SUPPLY & DRAINAGE
Supply: 1/2” NPT (9 GPM@40 psi)
Drain: 3/4” NPT (210°F, 1 GPM) vented
Line to be dropped from ceiling
Connection will be located 100” above nished oor, 5.5”
from the left side of the oven, 6” from the rear of the
oven
Oven comes pre-installed with water pressure regulator,
water pressure gauge, water solenoid and shut-off valve
Your local water conditions may damage your appliance.
Failure to properly treat water may result in damage and
may void your warranty. Ensure that your water supply
meets these minimum water quality specications:
Alkalinity: 22 ppm
Aluminum: 17 ppm
Calcium: 3.3 ppm
Free chlorine residual: 0.6 ppm
Magnesium: 0.65 ppm
PH range: 8.5 s.u.
Sodium: 8.5 ppm
Total Hardness: 11.9 ppm
Consult your local water treatment company for proper
water ltration system.
5.50
5.81
36.00
Ø 8.00
E1
W
D
DRAIN Connection
WATER Connection
ELECTRICAL
Connections
VENT
Connectio
n
104.88
72.25
95.0
108.25
62.00
86.00
99.75
55.00
1.50
[Front View]
[Side View]
[Plan View]
E2
86.75