Filter
Top Products
– 12 –
Check the circuit breaker in the electrical panel to see if it has tripped.2.
Check that the feeder is correctly installed and that the feeder handle has been lowered. Check 3.
that the bowl and lid are correctly installed.
Wait for up to 30 minutes and then try to start the machine again. Call in a service technician for 4.
further action.
Low Capacity or Poor Processing Results When Using the Feeder:
Select the right cutting tool or combination of cutting tools.1.
Always use the ejector plate.2.
Check that the knives and slicing discs are sharp and without any defects.3.
Press the food down loosely.4.
Low Capacity or Poor Processing Results When Using the Bowl:
Separate the foods into smaller, evenly-sized pieces, maximum 1x1x1 in. (3x3x3 cm).1.
Process for a shorter or longer period of time.2.
Process a smaller amount each time.3.
Always have the scraper tted and use as required.4.
The Cutting Tool Cannot Be Removed When Using the Feeder:
Always use the ejector plate.1.
Carefully remove the cutting tool by turning it clockwise.2.
speCifiCaTions
Type of Processing:
Slices, dices, shreds, and/or grates fruit, vegetables, dry bread, cheese, nuts and mushrooms.1.
Chops and grinds meat, sh, fruit, vegetables and nuts.2.
Mixes/blends sauces, aromatic butter, mayonnaise, soups, dressing, thickenings, desserts, etc.3.