Filter
Top Products
18
Loosen and the screw V and pull out the burner
from the support being careful not to damage the
ignition plug and the thermocouple
Unscrew the nozzle R using a 7 mm. spanner and
replace it with the nozzle for the new type of gas
according to what is indicate in the table below
ATTENTION: pay extra attention to avoid damage
to the igniter and thermocouple.
Re‐install all the parts in revers sequence
STEP 4: BROILER BURNER
Loosen the screw and pull out the burner from
the support being careful not to damage the
ignition plug and the thermocouple.
Using a 7 mm [name of the tool] unscrew the
nozzle. Replace the nozzle using the conversion
set supplied with the range or by a Bertazzoni
authorized parts warehouse. Each nozzle has a
number indicating its flow diameter printed on
the body. Consult the table on page 20 for
matching nozzles to burners.
Adjust the gap X by setting it to fully open
position.