Filter
Top Products
31
- BROILER (Broiler heating element) to
be used with temperature selector at 500°F
for broiling
-
CONVECTION BROILER (Broiler
heating element + fan) to be used with
temperature selector at 500°F for convection
broiling
-
CONVECTION (Circular heating
element + fan) to be used with oven
temperature from 0 to 500°F/260°C
-
DEHYDRATE (Bottom heating element
+ fan) to be used with temperature selector
at 100°F (corresponding to an internal oven
setup fixed temperature of 100°F/38°C)
-
PROOFING (Bottom heating element)
to be used with temperature selector set at
150°F (corresponding to an internal oven
setup fixed temperature of 100°F/38°C)
-
WARMING‐Level 1 (Bottom heating
element) to be used with temperature
selector set at 200°F (corresponding to an
internal oven setup fixed temperature of
140°F/60°C)
-
WARMING‐Level 2 (Bottom heating
element) to be used with temperature
selector set at 250°F (corresponding to an
internal oven setup fixed temperature of
170°F/77°C)
-
WARMING‐Level 3 (Bottom heating
element) to be used with temperature
selector set at 300°F (corresponding to an
internal oven setup fixed temperature of
220°F/105°C)
-
CLEAN (Broiler + Bottom heating
elements) to be used with temperature
selector set at CLEAN for automatic self‐
cleaning cycle at a temperature of about
840°F/450°C (see proper chapter “SELF
CLEANING THE OVEN” pag.35 for details) .
USING THE OVEN
OVEN LIGHT
The appliance is equipped with two oven lamps
that light up when the oven door is opened or
each time the oven is in operation. They are
turned off during the cleaning cycle.
COOLING FANS
The appliance is equipped with two cooling fan
motors that activate when the oven is in
operation for cooking or cleaning, except in case
of DEHYDRATE and PROOFING functions. In
stand‐by condition (both selector in OFF position)
the cooling fan motors operate if oven
temperature exceeds approximately 430°F/220°C
and stop automatically when oven temperature
drops below approximately 285‐360°F/140‐
180°C.
FRONT INDICATOR LIGHTS
This appliance is equipped with 3 indicator lights
on the front panel:
‐ CLEAN/RED colour: on with door locked during
cleaning cycle
‐ HEATING/BLUE colour: on when cooking or
cleaning temperature is reached, always on
during functions Dehydrate‐Proofing‐Warming
levels 1‐2‐3
‐ PRE‐HEATING/BLUE colour: on during pre‐
heating period; not active for functions
Dehydrate‐Proofing‐Warming levels 1‐2‐3.
The indicator lights flash intermittently (in some
case together with the sound buzzer) when an
error is detected. For explanation of errors,
please refer to the chapter TROUBLESHOOTING
GUIDE.
SOUND BUZZER
The appliance is equipped with a sound buzzer
that emits a triple “beep” each time the pre‐
heating time is finished (not used for functions
CLEAN and Dehydrate‐Proofing‐Warming levels
1‐2‐3”) and a single intermittent “beep” in some
case jointly with the indicator light when an error
is detected (refer to chapter TROUBLESHOOTING
GUIDE) .
OVEN CONVECTION FAN
The appliance is equipped with an oven fan
mounted inside a circular heating element,
protected by a fan shield on the back of the oven
cavity; it operates each time that the oven
operates in the functions ROASTING, TURBO,
CONVECTION BROILER, CONVECTION BAKE and
DEHYDRATE.