Filter
Top Products
HL0070
- 3 -
Backsplash (RMP Series)
(Stainless steel wall covering
with warming shelves. Optional)
Model 418
10” Round adjustable
elbow (optional)
Model 415
7” Round adjustable
elbow (optional)
Model 412
transition
(3¼” x 10” to 7”)
Adapter and damper 3¼’’ x 10’’
(supplied with P5 and P8 blowers)
Adapter and damper
3¼’’ x 14’’ (supplied with P8 blower)
Standard
3¼” x 10”
duct
Standard
3¼” x 14” duct
Model P5
single-blower
(500 cfm)
K210A HOOD
- K210A MODEL RANGE HOOD SYSTEM -
INTERIOR BLOWERS-
Flow deviator
(vertical exhaust only)
(supplied with P5 and P8 blowers)
Model 647
(7” Round wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Round wall cap)
8” Round
standard
duct
Model 407
(7” Round—
2 ft sections)
Model 413
transition
(3¼” x 10” to 8”)
Model 459 transition
(3¼” x 14” to 8”)
Model P8 dual-blower (900 cfm)
For use with 36” hoods or wider
NOTE: The dual blower P8 must be
installed with 3¼” x 14’’ duct. If it is
impossible to connect the dual
blower P8 to a 3¼” x 14’’ duct, use a
3¼” x 10’’ duct. In that case, the
blower performance will be
decreased by 25%.
Rough-in kit
(supplied with P5 and P8 blowers)