Filter
Top Products
Features
ᕡ Handle
ᕢ Keyhole for the handle
ᕣ Magnetic lid holder
ᕤ Knife sharpener
ᕥ Keyhole for knife sharpener
ᕦ Cap
ᕧ Knife sharpener-storage
ᕨ Cable-storage
Technical data
Voltage ......................................: 230 V / 50 Hz
Power consumption..................: 120 W
Important safeguards
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
Read all instructions carefully.
To prevent electrical shock, do not put the can
opener in water or other liquid.
Close supervision is necessary when any appliance
is used by or near children.
Unplug from outlet
- when not in use
- before putting on or taking off parts,
- before cleaning.
Allow the device to cool down before cleaning /
maintaining it.
Avoid contact with moving parts.
Do not operate devices with a damaged cord or
plug or with any other malfunctions or damage.
Send the damaged device to our customer ser-
vices. The use of attachments not recommended or
sold by the manufacturers may cause fire, electric
shock or injury.
This device is for private and for indoor use only.
Do not let the cord hang over edges or touch hot
surfaces.
Do not open pressurized (aerosol-type) cans.
Do not open cans of flammable liquids such as
lighter fluids. Do not place on or near a hot gas /
electric burner or a heated oven.
Do not use the device for other than intended use.
Keep these instructions.
Instructions for use
The can-opener:
The can-opener is equipped with an auto-stop
function, which stops the can-opener automatically
once the can has been opened completely.
The can remains fixed in the can-opener, while the
separated can lid is held by the magnet. In order to
use this function, it is important that you do not
press the handle down during the opening process.
If the handle is pressed down, the auto-stop
function will be deactivated - this function should
only be used if you do not want to open the can
completely.
To assemble the can-opener, please proceed as
follows:
Press the handle ᕡ firmly into the opening
provided ᕢ in the upper part of the can-opener.
The handle must be able to be moved downward
freely. If this is not the case, press the handle more
firmly into the opening.
How to use the can-opener:
1. Insert the plug into the power socket.
2. Raise the handle slightly and place the can
with the upper rim between the retaining cog
and the cutter wheel, so that the cutter wheel
rests on the inner side of the rim of the can.
3. Now place the movable magnet on the lid. The
lid will be held by the magnet once it has been
removed, and can be safely disposed of later.
4. Press down on the handle until the cutter
wheel penetrates the can lid.
5. The can-opener will now automatically start to
open the can.
•In order to use the auto-stop function, release
the handle as soon as the opening process
starts. The can-opener will stop automatically
as soon as the lid has been completely
removed.
If the auto-stop function does not work, for
example in the case of heavy cans, raise the
handle slightly to stop the can-opener.
•In order to open a can without using the
auto-stop function, for example if you do not
want to remove the lid completely, simply keep
the handle pressed during the opening
process. As soon as you release the handle,
the can-opener will stop.
6. To remove the opened can, raise the handle
slightly – the can will be released and the lid
will be held by the magnet, so that it can be
disposed of safely.
Note:
• Ensure that the magnet and the can lid are dry,
otherwise the magnet may not be able to hold the
lid.
•In order to avoid the can falling, hold your hand
under the can throughout the complete opening
process. Heavy cans should also be supported
gently with the hand on the bottom of the can.
How to sharpen a knife
Remove the cap ᕦ by pressing on the marking.
Fit the knife sharpener ᕤ into the keyhole ᕥ and
rotate it clockwise until it is firmly locked.
Press the handle to start the grinding wheel.
Insert the knife into the slot of the sharpening
guide, holding it flat against the wall of the housing.
Lower the blade until it touches the wheel.
Draw the knife towards you.
Repeat the same operation using the other slot to
sharpen the other side of the blade.
Cleaning and maintenance
Unplug the device.
The handle and the magnetic lid holder can be
removed for cleaning.
Wipe the can opener with a damp cloth.
Do not immerse the can opener in water.
Thank you for purchasing our electric can opener Bifinett KH 109.
This can opener with an integrated knife sharpener is handy and easy to use. It opens
small and big cans without difficulty and ensures that you always have
sharpened knives. The magnetic lid holder means you can remove the can lid safely.